Cambium Networks cnWave 5G Fixed, Руководство по эксплуатации и устранению неисправностей

Страница: 9 / 85

About This Guide 9
EU Declaration of Conformity
Hereby, Cambium Networks declares that the Cambium Networks cnWave™ 5G Fixed Series of Wireless
Ethernet Bridge complies with the essential requirements and other relevant provisions of Directive
2014/53/EU. The declaration of conformity may be consulted at
https://www.cambiumnetworks.com/ .
Application software (firmware)
Download the latest cnWave™ 5G Fixed products family software and install it in the Base Transceiver
System (BTS) and Customer Equipment Premise (CPE) before deploying the equipment. Instructions for
installing software are provided in the cnWave™ 5G Fixed Planning and Installation Guide (available at
https://support.cambiumnetworks.com/files/28cnwave/ ).
Ethernet networking skills
The installer must have the ability to configure IP addressing on a PC and to set up and control products
using a web browser interface.
Lightning protection
To protect outdoor radio installations from the impact of lightning strikes, the installer must be familiar
with the normal procedures for site selection, bonding and grounding. Installation guidelines for the
cnWave™ 5G Fixed platform family is available in the Lightning Protection Units (LPUs) topic in the
cnWave™ 5G Fixed
Planning and Installation Guide.
Specific expertise and training for professional installers
To ensure that the cnWave™ 5G Fixed series are installed and configured in compliance with the
requirements of EU, ISEDC and the FCC, installers must have the radio engineering skills and training
described in this section.
Use the Training link to access the technical training program (from Cambium Networks).
Legal and Open-Source Software statements
Refer to the cnWave™ 5G Fixed Legal and Open-Source Guide for:
l
Cambium Networks end user license agreement and
l
Open-Source Software Notices.
Problems and warranty
Reporting problems
If any problems are encountered when installing or operating this equipment, follow this procedure to
investigate and report:
1. Search this document and the software release notes of supported releases.
2. Visit the Support website (Cambium Networks).
3. Ask for assistance from the Cambium Networks product supplier.
4. Gather information from affected units, such as any available diagnostic downloads.
5. Escalate the problem by emailing or telephoning support.