Cambium Networks cnWave 5G Fixed, Руководство по эксплуатации и устранению неисправностей

Страница: 80 / 85

General Troubleshooting Procedures 80
Parameter Description
Note: This is an option that you can use in case of loss of
the IP address.
Reset Configuration Except IP
Management Resets the BTS configuration parameters except for the
IP address.
This is an option that can be used to reconfigure a BTS
from scratch, but it will not reset the IP address.
Therefore, you can use the web interface or SNMP to
replay a saved configuration if needed.
When you select this option, the Radio Recover Console
page appears with the following details:
l
Default Mode - Keep IP Management
l
BTS rebooting information
Boot - Normal An option, which is equivalent to a normal booting
process and keeps all the configurations unchanged.
TFTP Recovery
Server IP Indicates the IP address of a TFTP server that must be
installed and executed for the BTS. This configuration
enables the BTS to use the image file uploaded in the
Filename parameter for booting the BTS.
To complete the action, you must click Boot – TFTP
Recovery.
This option can be used if the BTS image has been
corrupted and cannot therefore start the application.
Note: The image that is loaded using the Filename
parameter must be the one stored in the TFTP directory.
You must always keep a copy of the operating software
in that directory.
Backup Recovery
Choose File An option used to reload one of the two BTS images
available to restart the BTS.
How to hardware reset a CPE to factory default?
If the CPE fails in a field (site) and if it is not possible to access the CPE using the web interface due to
loss of IP address or any reason, then you must execute a process to recover the CPE. The process offers
several options on which part of the configuration can be kept or the entire CPE can be reset to factory
defaults.