Cambium Networks cnWave 5G Fixed, Руководство по эксплуатации и устранению неисправностей

Страница: 36 / 85

Operational Procedures for BTS 36
for some CPEs to reconnect depending on the range and the number of frequencies in their
respective scan lists.
Changing the BTS polarization - No reboot required
The Systems page in the B1000 UI allows you to change the antenna polarisation settings.
Perform the following steps to modify the parameter specific to polarisation:
1. From the main B1000 dashboard page, navigate to System > Radio.
The Radio page appears.
For information on how to log on to the B1000 UI, refer to the Accessing the B1000 UI section.
2. Select the required polarisation option (Horizontal or Vertical) in the Polarisation field, as shown in
Figure 25 .
Figure 25:
The polarisation parameter in the Radio page
3. Click Save to apply the change.
When you change the value of this parameter, the Save button at the top right corner is
highlighted (in green color). This indicates that it is necessary to save or apply the configuration
change that you made in the Frequency text box.
Even though a reboot of the system is not required, the CPEs must have the correct polarization as
that of BTS or it is good to set this parameter to Auto Detect in the Radio page of C1oo UI.
For more information about the C100 UI settings, refer to the cnWave™ 5G Fixed Configuration
Guide.
Note
Ensure that there is no disruption to the service on changing the polarisation settings.