Calsense 500 Series, Руководство по программированию

Страница: 59 / 66

® SECTION 12 (-F) OPTION
making
since 1986
water work
2. Press the PLUS or MINUS keys to
change the number.
3. Press the blue ARROW keys to move
the cursor to the OFFSET: setting.
4. Press the PLUS or MINUS keys to
change the number.
Note: The two settings that must be set are the K
value and the Offset. If you know these values enter
them now. If not Call Calsense at 1-(800)-572-8608
for assistance.
2. Regular flow meter setup
If the answer to Use your own K & Offset is NO.
1. Press the blue ARROW keys to move
the cursor to the SIZE setting.
2. Press the PLUS or MINUS keys to
change the flow meter type.
Refer to the chart (Figure 12.5), to choose the
correct flow meter type.
MODEL NUMBER SIZE
FM-1
FM-1B
FM-1.25B
FM-1.5
FM-2
FM-3
1” PLASTIC FLOW METER
1” BRASS FLOW METER
1 ¼” BRASS FLOW METER
1 ½” PLASTIC FLOW METER
2” PLASTIC FLOW METER
3” PLASTIC FLOW METER
Figure 12.5
3. Learn Expecteds (Flow rate)
This allows you to learn the expected flow rate for
each station at the next program start. Once the flow
rate has been recorded, the entry on the screen will
default back to NO.
1. After you have entered the appropriate
Flow Meter(s) select the LEARN
EXPECTEDS Menu key (Figure 12.6).
Is a Flow Meter in use ? YES
automatically learned.)
Learn Expecteds
(Expected Flow Rates can be
METER 1 METER 2 METER 3
SIZE: FM-1.5 FM-2 FM-1.5
FLOW METER
Use your own K & Offset ? NO
Figure 12.6
This will bring you to the LEARN THE EXPECTED
FLOW RATES screen (Figure 12.7).
PROG A . . . . . . . . . . . . . . . . . . . . . . . NO
DRIP 1 . . . . . . . . . . . . . . . . . . . . . . . NO
DRIP 2 . . . . . . . . . . . . . . . . . . . . . . . NO
PROG B . . . . . . . . . . . . . . . . . . . . . . . NO
PROG C . . . . . . . . . . . . . . . . . . . . . . . NO
PROG D . . . . . . . . . . . . . . . . . . . . . . . NO
PROG E . . . . . . . . . . . . . . . . . . . . . . . NO
to set the expected flow rate.
Learn The Expected Flow Rates for:
LEARN THE EXPECTED FLOW RATES
each station and use the measured flow
At the next program start , turn on
Figure 12.7
•
LEARN EXPECTEDS: This allows you to
learn the expected flow rate for each station
at the next program start. Once the flow rate
has been recorded the entry on the screen
will default back to NO.
2. Press the PLUS or MINUS keys to
select the program.
3. Press the blue ARROW keys to
change the setting.
THIS CONCLUDES THE (-F) OPTION
SECTION