SECTION 5 WEATHER
®
making
since 1986
water work
Total Mins : 5.0
Max Days : 00
Moist Set : 99
Moist Read : - -
MASTER
Soak-In Time : 5 No Water Days 0
Test
STATION PROGRAMMING
Station 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROG A
Mins per Cycle : 2.5
Figure 5.38
•
MOIST READ:
This entry is non-
changeable. As a moisture sensor
reading goes above the determined
moisture set point, the controller
stops irrigation. When the moisture
level reading drops below the
moisture set point. The controller
automatically begins to irrigate more
of the programmed time to where it
may water the full programmed
amount (Figure 5.39).
Total Mins : 5.0
Max Days : 00
Moist Set : 99
Moist Read : 45
Soak-In Time : 5 No Water Days 0
Test
STATION PROGRAMMING
Station 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . PROG A
Mins per Cycle : 2.5
MASTER
Figure 5.39
3. Test Moisture Sensor
1.
Press the
TEST
Menu key to test the
station that you are currently on.
2.
If you want to test a different station
press the
STATION UP
or
STATION
DOWN
keys to the right of the display
screen.
Note:
This will only test the station selected,
but will
not
get a reading from the moisture sensor.
If you want to retrieve a current reading from the
moisture sensor,
3.
Press the
MANUAL
Menu key.
The MANUAL IRRIGATION screen (Figure 5.40).
MANUAL MENU
Manual Watering Manual Program 1
Test Manual Program 2
MV Override Walk-Thru
Use Hold-Over
Figure 5.40
4.
Press the
TEST
Menu key.
The VALVE TESTING screen is displayed
(Figure 5.41).
Test Station 1 for 2.0 minutes
Test Station 1 for Moisture Sensor
( MASTER )
VALVE TESTING
Learn the Expected at Station 1
Figure 5.41
5.
Press the blue
ARROW
keys to
move the cursor to the
TEST
STATION # FOR MOISTURE
SENSOR
Entry (Figure 5.42).
Test Station 1 for 2.0 minutes
Test Station 1 for Moisture Sensor
( MASTER )
VALVE TESTING
Learn the Expected at Station 1
Figure 5.42
6.
Press the
PLUS
or
MINUS
key to
change the station entry.
