Calsense 500 Series, Руководство по программированию

Страница: 28 / 66

SECTION 5 WEATHER ®
making
since 1986
water work
WIND GAGE ? YES
than 15 MPH
than 10 MPH
Response to wind by Program
PAUSE IRRIGATION when wind is higher
RESUME IRRIGATION when wind is less
WIND GAGE SETUP
Is controller Wired to a
Figure 5.17
6. Use the PLUS or MINUS keys to
change the speed (Figure 5.17).
2. Respond to wind by Program
1. Press the RESPONSE TO WIND BY
PROGRAM Menu key.
The USE OF WIND BY PROGRAM screen
(Figure 5.18).
PROG A . . . . . . . . . . . . . . . . . . . . . . . . .YES
USE OF WIND BY PROGRAM
When the wind speed is higher
than 15 MPH irrigation will be PAUSED.
Allow WIND to pause the following:
DRIP 1 . . . . . . . . . . . . . . . . . . . . . . . . . .YES
DRIP 2 . . . . . . . . . . . . . . . . . . . . . . . . . .YES
PROG B . . . . . . . . . . . . . . . . . . . . . . . . .YES
PROG C . . . . . . . . . . . . . . . . . . . . . . . . .YES
PROG D . . . . . . . . . . . . . . . . . . . . . . . . .YES
PROG E . . . . . . . . . . . . . . . . . . . . . . . . .YES
Figure 5.18
You can select the programs that you want to be
affected by wind. The default setting is YES. If you
do not want programs to be effected by wind
change the setting to NO for the appropriate
program.
2. Press the PLUS or MINUS keys to
change the settings.
3. Press the blue ARROW key to
move the cursor to the next entry.
4. Press the MAIN MENU key to return
to the MAIN MENU screen
(Figure 5.1).
THIS CONCLUDES THE WIND GAGE SETUP
SECTION
D. RAIN SWITCH
This section of the controller is used to activate the
use of a rain switch and have the controller turn
irrigation off due to rain detection.
1. Rain Switch setup
From the WEATHER SETUP screen (Figure 5.2).
1. Press the RAIN SWITCH Menu key
if you want to activate a Rain
Switch.
The RAIN SWITCH SETUP screen is displayed
(Figure 5.19).
a Rain Switch Device? YES
RAIN SWITCH SETUP
Is the controller connected to
Irrigation will be STOPPED when the
rain switch detects rain.
There's a special way to wire them to
this controller to avoid NO CURRENT
and NO FLOW errors.
A Rain Switch is a device like a
MINI-CLIC or RAIN GUARD.
Figure 5.19
2. Press the PLUS or MINUS keys to
change the setting.
If you select YES this will change the screen to read,
“Irrigation will be stopped when the rain switch
detects rain”. If you do not want irrigation to be
affected by the rain switch leave the setting at the
default setting of NO (Figure 5.20).
CAUTION:
If YES is selected, and the controller is not hooked
up to a rain switch irrigation will be halted . This is
due to rain switch wiring requirements .
a Rain Switch Device? YES
RAIN SWITCH SETUP
Is the controller connected to
Irrigation will be STOPPED when the
rain switch detects rain.
There is special way to wire them to
this controller to avoid NO CURRENT
and NO FLOW errors.
A Rain Switch is a device like a
MINI-CLIC or RAIN GUARD.
Figure 5.20
THIS CONCLUDES THE RAIN SWITCH SECTION