®
SECTION 6 REPORTS
making
since 1986
water work
The REPORTS menu screen is displayed
(Figure 6.2).
REPORTS
This Month / Last Month Alerts
24 Month Station History
Hold Over
ET & Rain Tables Live Screens
Figure 6.2
3.
Press the
THIS MONTH / LAST
MONTH
Menu key.
The THIS MONTH / LAST MONTH TOTALS screen
is displayed (Figure 6.3)
HCF Show Time
STATION 1
Irrigated: 2181.6 0.0
Non Controller: 240873.4 0.0
Test & Manual: 2009.0 0.0
THIS MONTH / LAST MONTH TOTALS
Irrigated: 6169.3 0.0
(gallons) This Month Last Month
Figure 6.3
4.
Press the
PLUS
or
MINUS
keys to
select the desired station.
5.
Press the
HFC
Menu key to
change the information to
Hundreds of Cubic Feet.
6.
Press the
GALLONS
Menu key to
change information back to
Gallons.
7.
You can also view Time in Minutes
for each station by pressing the
SHOW TIME
Menu key.
8.
To change the information back to
Water Usage press the
SHOW
WATER USE
Menu key.
THIS CONCLUDES THE THIS MONTH / LAST
MONTH SECTION
B. 24 MONTH
The 24 month report shows the amount of water
used, budgeted (if budget enabled), and ET (if ET
enabled) for the last 24 months.
From the REPORTS menu screen (Figure 6.2).
1.
Press the
24 MONTH
Menu key.
The 24 MONTH screen is displayed (Figure 6.4)
24 MONTH HISTORY
Last Year USE BUDGET ET
Jan 2005 0 0 0.00
Feb 2005 0 0 0.00
Apr 2005 26380 25309 3.62
Mar 2005 0 0 0.00
May 2005 32283 31288 4.83
Jun 2005 48282 49223 5.32
Jul 2005 53929 51283 6.01
Aug 2005 64833 51283 6.98
Sep 2005 53222 50392 5.51
Oct 2005 41892 40299 4.32
Nov 2005 31223 32438 3.11
Dec 2005 22983 21343 2.01
Figure 6.4
The report is listed in three columns:
•
USE:
The amount of water used (gallons)
•
BUDGET:
The amount set in the budget
(gallons)
•
ET:
The amount of ET for the month
(inches)
2.
Press the
LAST YEAR
Menu key
to access last year’s information.
3.
Press the
THIS YEAR
Menu key to
go back to this year’s information
THIS CONCLUDES THE 24 MONTH SECTION
C. HOLD-OVER
Hold over occurs if the controllers irrigation cycle is
forced to end before it has finished, any unfinished
irrigation will be saved as hold-over time, the
controller will then try to use up this hold over time
during subsequent irrigation cycles when
programmed to do so.
