®
SECTION 7 LIGHTS / SECTION 8 RADIO REMOTE
making
since 1986
water work
B. TESTING A LIGHTS CIRCUIT
1.
You can also test a light circuit by
pressing the
MANUALLY START
Menu key.
This will activate the program selected for four hours
from the time you pressed the button (Figure 7.2).
Will turn OFF at 5:24PM on Fri (10/28)
currently: STOP
Fri 10/28/05 1:24:52PM
Status: MANUALLY TURNED ON
Schedle for : Fri, Oct 28 2005
OFF TIMES: OFF OFF
LIGHTS SCHEDULING & MANUAL OPERATION
L1:
ON TIMES: OFF OFF
Figure 7.2
2.
To end the light program test,
press the
STOP
key.
Note:
The
STOP
Menu key can also be pressed
to end the lights program in progress.
THIS CONCLUDES THE LIGHTS SECTION
SECTION 8: RADIO REMOTE
A. ENABLE RADIO REMOTE
If the Radio Remote Control option is installed on a
controller (-RR), the
RADIO REMOTE
Menu key will
be available at the MAIN MENU screen.
From the MAIN MENU screen.
1.
Press the
RADIO REMOTE
Menu key.
The RADIO REMOTE ACTIVATION screen will
appear (Figure 8.1).
2.
Press the
ENABLE RADIO
REMOTE NOW
Menu key to
activate the controller Radio
Remote. You can also set
Normal Command Codes,
addressed Command Codes
and the receiver frequency at this
screen. (see the instruction sheet
that is shipped with the Calsense
Radio Remote for more
information).
Code for NORMAL COMMANDS is: * 1 1 1
Code for ADDRESSED COMMANDS is: * -
RADIO REMOTE ACTIVATION
Enable Radio Remote NOW
Receive Chanel : 5 (160.150Mhz)
Figure 8.1
3.
Press the blue
ARROW
keys to
highlight the different areas on
the screen.
4.
Press the
PLUS
or
MINUS
keys
to change the individual entries.
THIS CONCLUDES THE RADIO REMOTE
SECTION
