SECTION 10 MANUAL KEY
®
making
since 1986
water work
H. USE HOLD-OVER
Hold-Over time is generated whenever scheduled
irrigation has hit the Stop time. The controller will
first try and use up any hold-over in the table after
scheduled irrigation has finished, but before the Stop
Time has been reached. The Use Hold-Over feature
allows the user to schedule a specific time and
day(s) to try and use up any hold-over in the table.
From the MANUAL MENU screen (Figure 10.1).
1.
Press the
USE HOLD-OVER
Menu key.
The MANUAL USE OF HOLD-OVER screen is
displayed (Figure 10.11).
MANUAL USE of HOLD-OVER
irrigation, do you want a special
In ADDITION to the normally scheduled
NO
time to run Hold-Over?
Figure 10.11
2.
Press the
PLUS
or
MINUS
keys to
select whether or not you want to
use Hold-Over. If YES is selected,
the screen will change to reveal the
set up parameters (Figure 10.12).
Schedule: - - - - - - - - - - - - - - - - - - - - -
(No Water prevents this from running.)
Start Time: 10:00PM
Stop Time: OFF
YES
time to run Hold-Over?
MANUAL USE of HOLD-OVER
irrigation, do you want a special
In ADDITION to the normally scheduled
Figure 10.12
3.
Press the blue
ARROW
keys to
highlight the Start Time.
4.
Press the
PLUS
or
MINUS
keys
to set the time that you want the
Hold-Over irrigation to begin.
5.
Press the blue
ARROW
keys to
highlight the Stop Time.
6.
Press the
PLUS
or
MINUS
keys
to set the Stop Time.
7.
Press the blue
ARROW
keys to
highlight the Schedule days.
8.
Press the
PLUS
or
MINUS
keys
to turn on the days that you want
the Hold-Over to be used on.
9.
Press the
MAIN MENU
key to
return to the MAIN MENU
screen.
CAUTION:
No Water Days prevents the Manual HOLD-Over
program from Running.
THIS CONCLUDES THE USE HOLD-OVER
SECTION
