INNOVATION Total 1 Rev. 8 06/2013
INSTALLATION AND SERVICE MANUAL FOR INNOVATION
Total 1
Bean-Cup Brewer
49
www.cafection.com
(800) 561-6162
5.6.3 Emptying the waste bin
Frequency: Daily or every 200 cycles*
After each coffee cycle, the spent grounds and used filter paper are automatically discarded into the
waste bin located in the stand. To prevent the bin from overflowing there is an automatic function which
stops the brewer and shows the following message on the screen:
The maximum setting = 400
The minimum setting = 0
Setting the maximum counter to 0 will disable the automatic function and will cause an overflow
problem if the bin is full.
The equipment will not dispense beverages until the bin is emptied and the counter is reset. To reset
the counter see section 4.1. This factory set counter can be adjusted to the waste bin size used. See
the machine parameters for more instructions on changing the setting.
How to empty the stand waste bin:
1. Open the stand door located directly below the brewer;
2.
Cut the filter paper 4 “ below the drum with scissors or tear gently; DO NOT YANK ON THE PAPER!
3.
Remove the filled plastic bag from the spent grounds bin and replace with a new one;
4. See section 3.13 to see how to put the paper back in place.
How to empty the brewer waste bin:
1. Open the brewer door;
2. Take the front panel off;
3.
Cut the filter paper 4” below the drum with scissors or tear gently; DO NOT YANK ON PAPER!
4. See section 3.13 to see how to put the paper back in place;
5. Replace the front panel and close the door.
It is very important not to yank on the filter paper. Doing so may prevent the brewer from functioning
properly.
Cleaning and Sanitizing
