INNOVATION Total 1 Rev 8 06/2013
www.cafection.com
(800) 561-6162
48
INSTALLATION AND SERVICE MANUAL FOR INNOVATION
Total 1
Bean-Cup Brewer
Cleaning and Sanitizing
5.5
Overall Cleaning
It is important to keep the brewer and its surroundings clean and tidy. Inspect your brewer both inside and
out upon each visit and clean where needed. Please make sure that the unit is clean, safe and functioning
before you leave.
5.6
Exterior Cleaning
Frequency: Daily
To minimize scratching and preserve appearance, we recommend using a clean damp sponge or soft
cloth lightly treated with a nonabrasive detergent for cleaning the exterior of the unit and the base
cabinet. After removing all food soils, thoroughly dry with a clean, soft cloth.
Non food-contact parts to be verified and wiped clean
Plastic top cap
Stand (optionnal)
Metal cabinet
Plastic door
Exterior parts requiring additionnal cleaning instructions (see below)
Drip tray
Waste Bin
Parts for this brewer are
NOT
dishwasher safe!
5.6.1 Cleaning the screen
Frequency: Daily or as needed
WARNING, Only use a 100% cotton soft cloth
5.6.2 Cleaning the drip tray
Frequency: Daily or as needed
The drip tray is not hooked up to a drain therefore it should be inspected and emptied periodically.
WARNING,
drip tray may be full.
Use caution and keep it level to avoid spilling. Remove the drip tray by simply lifting gently and pulling it
out from underneath the door. Rinse both parts under water and dry thoroughly with a clean dry cloth or
towel. Reinstall the drip tray onto the brewer and make sure that it is stable.
