INNOVATION Total 1 Rev. 8 06/2013
INSTALLATION AND SERVICE MANUAL FOR INNOVATION
Total 1
Bean-Cup Brewer
41
www.cafection.com
(800) 561-6162
4.6.3 Tools tab
1. Pushing this button will open the touch screen utility screen. Only use the options and tools in
the ‘‘Tools’’ tab of the utility screen. ‘Draw Test’ Make a drawing on screen to test the accuracy of
the touch screen calibration. The touch screen is already calibrated during assembly. If you want to
do the calibration again, press the ‘clear parameter’ button and then ‘linearization’. Choose 9 points
calibration. Press on all 9 circles one after the other.
Note: For calibration procedure see Annex 6.
2. After pushing this button the screen below will pop-up and you will be able to set time and date.
3. This button is used to see the coin acceptor status. Note: if there is no coin acceptor in the machine
or it is not plugged correctly, this box won’t be visible.
4. This button is used to enter the manual control mode. Warning! This is made to be used by an
advanced technician.
Service Software
1.
2.
3.
4.
It is important to set date and time:
-Service Log
-Email alerts
-Cafection’s management tool
-Error Log
Please contact Technical Support for the whole
information about our Service Software
1 800 561-6162
