INNOVATION Total 1 Rev. 8 06/2013
INSTALLATION AND SERVICE MANUAL FOR INNOVATION
Total 1
Bean-Cup Brewer
37
www.cafection.com
(800) 561-6162
Service Software
4.5.2.1 Sample pop-up explanation
1. These buttons allow the operator to have a sample of ALL the dry ingredients of the tested recipe.
To weight the ingredients MAKE SURE that a container is placed under each product dispenser.
2. This button allows the operator to have a sample of the drink but without the ingredients. No soluble
powder or coffee beans will be dispensed.
3. This button allows the operator to have a sample of a complete drink.
Note : Samples are not registered in the products counters.
4.5.3 Brew cycle tab
There are four different brew cycles in the Total 1. The brew cycle is automatically selected depending
on water level in the coffee.
For brewer water quantities equal or bellow 100 units, Cycle #4 will be selected. It is a quick cycle for
low water levels.
For brewer water quantities between 101 and 187 units, Cycle #1 will be selected. It is the regular
Avalon brew cycle.
For brewer water quantities between 188 and 269 units, Cycle #2 will be selected. It is a 3 swirling
cycle. Water volume is high and coffee quantity must be also high. Water is dispensed in 3 shots in
the brewer and the coffee-water mix is swirled 3 times to make sure the all coffee is in contact with the
water.
For brewer water quantities of 270 and higher, the double brew cycle #3 is selected. The coffee
machine will split in half the water and ingredient quantity and do two brew cycles.
Extra grind time : The amount of time the grinder is activated to grind all the beans depends on the
amount of coffee beans set and is calculated by the computer. If the grinder is aged and does not grind
all the beans you can add some extra grind time via this box. The default setting is 0.
20 units = 1 second.
Pause 1 : One of the contact time of water and coffee. If you want more extraction, increase this time.
20 units = 1 second.
Pause 2 : Another contact time of water and coffee. If you want more extraction, increase this time.
20 units = 1 second.
Please contact Technical Support for the whole
information about our Service Software
1 800 561-6162
