INNOVATION Total 1 Rev. 8 06/2013
INSTALLATION AND SERVICE MANUAL FOR INNOVATION
Total 1
Bean-Cup Brewer
57
www.cafection.com
(800) 561-6162
Preventive Maintenance
6.2
Brewer Assembly
PM: Yearly or every 25,000 coffee cycles
The brewer is the heart of the equipment and is responsible for the taste in the cup. It needs to be
serviced regularly to maintain the quality of the beverages served. We recommend having your brewer
assembly swapped with a new one that you have on hand and returned to Cafection for Preventive
Maintenance every 25,000 coffee cycles. For a minimum charge, CAFECTION will completely clean
and replace all necessary parts such as the cylinder, the piston seal and the screen and seal which are
all responsible for the vacuum extraction and coffee taste in the cup. It will then be returned with a 1
year warranty against defective parts.
Contact CAFECTION for parts and additional instructions.
Inspection
The following are signs that the extraction is not being performed adequately and that your brewer may
be due for preventive maintenance:
• if the seal is damaged;
• if air gets into the cylinder and creates bubbles in the coffee;
• if there are coffee grounds in the delivered product;
• if the spent coffee grounds remain wet.
Screen and Seal
Cylinder
Piston Seal
Brew chamber
