INNOVATION Total 1 Rev. 8 06/2013
INSTALLATION AND SERVICE MANUAL FOR INNOVATION
Total 1
Bean-Cup Brewer
51
www.cafection.com
(800) 561-6162
5.7.2 Soluble Canisters
Removing whipping assembly for cleaning
Frequency: Weekly or every 200 cycles
If there is residue, remove the assembly for manual cleaning under hot water:
1. Remove the tube from the base;
2. Lift off the funnel and twist off the whipper base, remove propeller,
whipper base and clean all parts and gaskets with hot water;
3. Rinse thoroughly under hot water and use tube brush if necessary for
tubing area;
4. Air dry completely;
5. Reinstall all parts in the reverse order.
6.
Order a large beverage to confirm that all parts or switches have been
replaced.
Removing canisters for cleaning
Frequency: Monthly or every 1,000 cycles
To ensure a consistent product quality, we recommend removing and
emptying the canisters on a monthly basis. This will ensure that the
product does not adhere to the walls of the canister.
1. Unlock the door;
2. Remove the hood of the machine;
3. Pull the canister through the top of the brewer to disengage it from the
motor and transmission;
4. Clean and sanitize under hot water and air dry completely;
5. Reinstall all parts and reload products in the reverse order.
6.
Order a large beverage to confirm that all parts or switches have been
cleaned
5.7.3 Whipper
Removing the whipper assembly for cleaning
Frequency: Weekly or every 200 cycles
1. Refer to section 3.2;
2. Remove the base of the whipper;
3. Rinse under hot water;
4. Let stand to dry;
5. Reinstall all the parts in the reverse order;
6.
Order a large beverage to confirm that all the parts are in place.
Cleaning and Sanitizing
