INNOVATION Total 1 Rev 8 06/2013
www.cafection.com
(800) 561-6162
34
INSTALLATION AND SERVICE MANUAL FOR INNOVATION
Total 1
Bean-Cup Brewer
4.3
Status Screen
To get to the screen below press the setup (white) button (SW2 as shown in section 3.17) on the
main board inside the door of the machine and press the STATUS tab.
1. By pressing this box, the screen at the right appears and the technician can enter what service has
been done on the machine.
2. The software version of the touch screen computer.
3. The serial number of the coffee brewer. Correct serial number is necessary for correct network
communications. Service users with “admin” access can set the serial number. See section
4.6.5 for
details.
4.
This is the firmware version of the controler chip, also called the EPROM, on the main board.
5. The thermostat PCB on the back of the coffee brewer is equiped with a tiny computer chip. This is the
version of the firmware contained in the computer chip..
6. Actual water temperature in Fahrenheit.
7. Actual time and date. Date and time can be set under ‘System’ sub tab ‘tools’
8. Three possible Status : Disabled, Enabled but NO link, WEB server link OK
9. The error board keeps the last 50 events in memory.
4.4
Password pop-up
The screen below should pop-up when you press the AUDITS, RECIPES, SYSTEM and ‘‘__’’ tabs. If so,
type in your password with the virtual keyboard and then press return. Depending upon the password you
enter, you will gain access to different service tabs. See section 4.1 for details about user levels.
Service Software
1.
2.
3.
5.
4.
6.
7.
9.
8.
Please contact Technical Support for the whole
information about our Service Software
1 800 561-6162
