manualshive.com logo in svg

Buffalo TeraStation TS3200D, Руководство пользователя

Поделиться
Скачать
Buffalo TeraStation TS3200D Скачать руководство пользователя страница 95

94

4 

Select a TeraStation to be the target backup device.

5 

Enter the administrator password of the target backup device, then click 

Start Failover

.

6 

If the administrator password is correct, the backup TeraStation will beep. To accept the settings from the main 
TeraStation, hold down the function button on the front of the backup TeraStation until it stops beeping.

7 

The I51 message will display on the LCD and NAS Navigator2 for both TeraStations. Wait until initialization 
finishes. Failover is configured after it finishes and the I51 message disappears.

Notes: 

•  If replication is configured for more than one folder, initialize the TeraStation before configuring failover.
•  The main TeraStation cannot be used as the backup location for Time Machine.
•  If email notification is enabled and failover occurs, navigate to 

Management

 - 

Email Notification

 - 

Edit

 in the 

main TeraStation's settings and click 

OK

.

•  Ethernet frame size settings for main and failover TeraStations should be 1500 bytes. To change the Ethernet 

frame size, navigate to 

Network

 - 

IP Address

, click the LAN port and 

Edit

, and change the Ethernet frame size to 

"1500" bytes.

•  Files whose filenames contain more than 80 alphanumeric characters will not be backed up.
•  If the I33 error message appears on the LCD display, navigate to 

Backup

 - 

Replication

 and click 

Resync

.

•  Don't use the same TeraStation for both failover and replication, or failover and Time Machine.

Additional Settings

Maintenance Mode

If failover is configured, change to maintenance mode temporarily before operating the following settings:
Initializing settings, changing the RAID settings, formatting drives, iSCSI volume, restarting or turning off the 
TeraStation, updating the TeraStation's firmware

Enable/Disable Maintenance Mode

Maintenance mode can be enabled and disabled at 

Backup

 - 

Failover

 in the main TeraStation's settings. Click 

Maintenance mode

 to enable maintenance mode, or click 

Cancel maintenance mode

 to disable maintenance mode.

Service IP Address

The "service IP address" will be the new address of the backup TeraStation when it takes over operation from the 
main TeraStation. If no service IP address is set, or a fixed IP address is set, an attempt is made to inherit the IP 
address from the main TeraStation.

Содержание TeraStation TS3200D























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды