manualshive.com logo in svg

Buffalo TeraStation TS3200D, Руководство пользователя

Поделиться
Скачать
Buffalo TeraStation TS3200D Скачать руководство пользователя страница 85

84

4 

Click 

Add

 under "Off-subnet Devices", enter the IP address of the target LinkStation or TeraStation, and click 

Close

.

If your setup meets the requirements below, you don't have to configure these settings:
•  The source and target TeraStations are on the same network.
•  No backup password is set for the target TeraStation.
•  No TeraStation from outside the subnet, or connected by a VPN, is used.

Notes: 

•  To back up data between LinkStations or TeraStations on a network using jumbo frames, make sure that 

both devices are configured to use identical (or similar) Ethernet frame sizes. If Ethernet frame sizes are 
significantly different, the backup job may not be properly performed. In such a case, select the default frame 
size (1500 bytes).

•  You can also specify hostname by a fully qualified domain name (FQDN).

Configuring a Backup Job

1 

In Settings, click 

Backup

.

2 

Click 

 to the right of "Backup".

Содержание TeraStation TS3200D























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды