manualshive.com logo in svg

Buffalo TeraStation TS3200D, Руководство пользователя

Поделиться
Скачать
Buffalo TeraStation TS3200D Скачать руководство пользователя страница 42

41

3 

Choose a RAID array.

4 

Click 

Set as a hot spare

.

5 

Step through the wizard.

6 

When the "Confirm Operation" screen opens, enter the confirmation number and click 

OK

.

Notes: 

•  To turn the hot spare back into a normal disk, choose 

Set as a normal disk

.

•  If a drive fails in the RAID array before it is rebooted, the hot spare will not automatically replace the failed 

drive. In this case, follow the steps below to repair the array.

(1)  In Settings, navigate to 

Drives

 - 

Drives

.

(2)  Click the drive that was configured as a hot spare, then click 

Dismount Disk

.

(3)  Click 

Rediscover Disk

.

(4)  Navigate to 

Drives

 - 

RAID

.

(5)  Choose the RAID array to repair.
(6)  Click the drive that was previously configured as a hot spare, then click "Recover RAID Array".
This will rebuild the RAID array.

RMM (RAID Mode Manager)

With RMM, you can create or expand a RAID array without erasing the data on the drives. To use RMM, insert all 
internal drives of the same size into the slots.

Changing from JBOD to RAID 1

Hard drives that aren't in a RAID array show "Normal". You must have at least two drives available in JBOD (not in a 
RAID array) to build the RAID 1 array with RMM.

1 

In Settings, click 

Drives

.

2 

Click 

 to the right of "RAID".

Содержание TeraStation TS3200D























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды