Buffalo TeraStation TS3200D, Руководство пользователя

Страница: 67 / 214

66
Configuring Access Restrictions for the Entire TeraStation
1
In Settings, click Drives .
2
Click to the right of "iSCSI".
3
Click the Security tab.
4
Click Edit under "Access Control (Target Discovery)".
5
Enable access restrictions, enter the username and password, and click OK .
Note: To enable mutual authentication in addition to username and password authentication, check "Mutual
Authentication" and enter the mutual authentication password.
To search or connect the volume which has mutual authentication enabled from Microsoft iSCSI Initiator,
mutual CHAP secret settings should be configured.
6
Click Close .
Configuring access restrictions for the entire TeraStation is finished.
Connecting Volumes on the Access-Restricted TeraStation
Using Microsoft iSCSI Initiator
If access restrictions are configured for the entire iSCSI volume, that volume will not be detected by Microsoft iSCSI
Initiator. To connect that volume, the configured username and password should be authenticated.
1
Open the Microsoft iSCSI Initiator.
2
Register the mutual authentication password to your computer first. If you didn't enable mutual
authentication, skip this step.
Click
CHAP in the "Configuration" tab. In the "Initiator CHAP secret" field, enter the configured mutual
authentication password and click OK .