Buffalo TeraStation TS3200D, Руководство пользователя

Страница: 208 / 214

207
LCD Message Description Corrective Action
I46 Migrating RAID
Array x...
Data migration or conversion (RAID
migration) is in progress.
Do not turn off the TeraStation power.
I47 Don't Power Off
System!
I48 Push Func to
Start Failover
This TeraStation is ready to become
the failover backup for the main
TeraStation. Hold down the function button on the front of the
target TeraStation until it stops beeping to accept
failover backup status.
I49 Lost Failover
Main The main TeraStation in the failover
configuration cannot be found. Make sure that the main TeraStation is on,
working, and connected to the network.
I50 Failover in
Maintenance Mode
Failover maintenance is in progress. Do not turn off the TeraStation power.
I51 Initializing
Failover…
Initializing the failover configuration. Do not turn off the TeraStation power.
I52 New Firmware
Available A new firmware version has been
released.
Update the firmware.
I54 Backup Job xx
Failed
A backup job has failed.
Make sure that the backup job is configured
correctly. Make sure that the NAS is on and not in
standby mode. If the backup job still fails, check
the status of NAS, network, and backup source
and destinations.
I55 Recovery Not
Authorized Authentication failed while
recovering TeraStation settings.
Settings can only be restored for the TeraStation
whose settings were originally saved. To restore
settings, insert the USB memory device, move the
Boot Mode switch on the rear of the TeraStation
to the USB position, and restart the TeraStation.
Or, settings can be restored from Settings with the
TeraStation powered on.
I56 Need License
for Camera There are not enough surveillance
camera server licenses.
Purchase and register an additional license.
I57 No Free Space
to Record There is not enough space to save
additional surveillance video.
Delete or move some of the stored video.
I58 Recording
Failure
Video not recorded.
Check your settings. Also, use the utilities provided
with your camera to check that the camera is
operating correctly.
Default Settings
Administrator's Name admin
Password password
Shared Folders
"share" (for both Windows and Mac computers). The recycle bin is enabled
on "share" by default.
DHCP Client
Normally, the TeraStation will get its IP address automatically from a DHCP
server on the network.
If no DHCP server is available, then an IP address will be assigned as follows:
IP Address: 169.254.xxx.xxx (xxx is assigned randomly when booting the
TeraStation.)
Subnet Mask: 255.255.0.0
Registered Group
"hdusers", "admin", and "guest" are default groups and cannot be edited or
deleted.
Microsoft Network Group Setting WORKGROUP
Ethernet Frame Size 1500 bytes (not including 14 bytes of the header and 4 bytes of FCS)
AFP Enabled