Control Panel
6
Manual
The
Manual Set
button accesses the function that allows you to use your own personal
Set
recipes in the Ultimate Baker’s Oven. You can choose the timing for each cycle of the
program. For example, in a humid climate the rising cycles can be reduced or, if a crustier loaf
is preferred, the baking time and temperature can be increased. Follow the guidelines for the
Manual Set function (Refer Page 14).
Time/
The
Time/Temp
button is for use with:
Temp
A) Bake Only setting (Refer Page 13)
B) Manual Set function (Refer Page 14)
Up and
The
Up and Down Arrows
have three functions:
Down
A) To use the Preset Timer (Refer Page 12)
Arrows
B) To use the Time/Temp feature for the Bake Only setting (Refer Page 13)
C) To use the Manual Set function (Refer Page 14)
Start/
The
Start/Pause
button has two functions:
Pause
A) Press the Start/Pause button to start the selected setting.
B) Press the Start/Pause button to interrupt a cycle. The Pause function allows you to be
creative with your bread making by pausing the machine for 10 minutes. The Pause function
can be activated in any cycle of any setting except the Keep Warm cycle.
Stop
To stop and cancel a setting in mid-cycle press the
Stop
button down for 5-10 seconds until
beeps sound and the Display Window is reset. This will result in the program being cancelled.
When the Stop button is pressed, the display will indicate BASIC BREAD 1250g 3:20
MEDIUM. When a setting time is complete the Ultimate Baker’s Oven will show 0:00 on the
display window. The bread machine is cooling and will be in the ‘Keep Warm’ cycle for 60
minutes.
Keep
The
Keep Warm/Operation Light
will illuminate on the control panel when the Ultimate
Warm/
Baker’s Oven is in operation. During the Operation of the machine the light will remain steady.
Operation
During the 60 Minute Keep Warm cycle at the end of the bread making cycle the light will
Light
flash.
Oven
Press the Light button at the top of the control panel to illuminate the interior cavity of the
Light
bread machine. The light will not remain on unless the light button is held down.
Power Failure Protection
The Ultimate Baker’s Oven has a built-in Power Failure Protection System. If the power supply to the
Ultimate Baker’s Oven is interrupted for 60 minutes or less, the Ultimate Baker’s Oven will
automatically resume the cycle when power is restored.
For the Power Failure Protection System to be implemented, the machine must be operating for a
minimum of 5 minutes. (If the charging time is less than 5 minutes the machine may not resume
operation when power is restored.)
If the power is not restored within 60 minutes it is recommended that the ingredients be discarded,
particularly if perishable ingredients such as dairy products, eggs, etc. have been used.
Содержание BB420
Страница 76: ...Notes Notes 74...