Brandt SB4000, Руководство оператора

Страница: 51 / 145

40
To be able to spray with the reduced width using only two ball valves, two fittings on the ball valves must be rotated
into different positions and two spray pipe hoses must be moved.
1. Remove the hoses from the two fittings that must be rotated.
2. Loosen the fitting clamps and rotate the two fittings as shown in Fig. 3.21. They must be pointing the directions
shown in Fig. 3.22.
3. Connect the hose from the right Outer
Boom to the fitting shown in Fig. 3.22.
4. Connect the hose from the left Inner Boom
to the fitting shown in Fig.3.22.
The Centre and Inner Booms are now controlled
by one ball valve and both Outer Booms are
controlled by the other ball valve. See Fig. 3.23.
Rotate this fitting
Rotate this fitting
F
IG
. 3.21 R
OTATING THE
H
OSE
F
ITTINGS
To Left Outer Boom
To Right Outer Boom
To Left Inner Boom
To Centre & Right Inner Boom
F
IG
. 3.22 C
ONNECTING THE
H
OSES
Controlled by the Right Ball Valve
Controlled by the Left Ball Valve
F
IG
. 3.23 A
REAS OF THE
S
PRAY
P
IPE
C
ONTROLLED BY THE
B
ALL
V
ALVES