manualshive.com logo in svg

Black Box 5000 MX215C, 5000 MX218C, Руководство пользователя

Поделиться
Скачать
Black Box 5000 MX215C, 5000 MX218C Скачать руководство пользователя страница 263

Glossary

261

RS-422

— An EIA-recommended standard for cable

lengths that extended the RS-232 50-foot limit.
Although introduced as a companion standard
with RS-449, RS-422 is most frequently
implemented on unused pins of DB25 (RS-232)
connectors.  Electrically compatible with CCITT
recommendation V.11.

RS-423

— An EIA-recommended standard for cable

lengths that extended the RS-232 50 foot limit.
Although introduced as a companion standard
with RS-422, RS-423 is not widely used.
Electrically compatible with CCITT
recommendation V.10.

RS-449

— An EIA-recommended standard for the

mechanical characteristics of connectors;
introduced as a companion standard to RS-422
and RS-423.  It specifies two connectors (a 37-
pin connector and a 9-pin connector); not
widely used.

RS-530

— An EIA-recommended standard for the

implementation of standard RS-422 or RS-423
Driver/Receivers on a 25-pin connector
(DB25).  It is intended as a replacement for RS-
449 for most data services using the same
connector as RS-232.

RTS, request-to-send

— An RS-232 interface signal,

sent from a DTE to the DCE, that indicates the
DTE has data to transmit. 

RX, receive

— An abbreviation meaning receive or

reception.

self-test

— A diagnostic feature used to test the

voice/fax channel locally that does not include
the link.

SF, single frequency

— See 

tone signaling

.

shroud

— The part of a Multiserver stacking

connector that is mounted on the underside of
a module.

signaling

— A handshaking protocol used between

telephone equipment.  Includes supervising
(on/off hook line status), alerting (ringing),
and call addressing (dialing) for switched
services.

signaling options

— Options related to signaling

that are configurable in the voice/fax module.
When the Multiserver is strapped for KTS, the
options include repeated ringing, interrupted
2/4 ringing, and interrupted 2 ring 1/2.  When
the Multiserver is strapped for E&M, the options
include DC and 2280 tone.  See also 

DC

signaling

and 

tone signaling

.

sign-on character

— The first character sent on an

ABR circuit.  It is used to determine the data
rate. 

single frequency

— See 

tone-signalling

.  

slow busy signal

— 

• In a switching mode, the response to a call
attempt when the called extension is busy.
• In a force-connect mode, the signal heard
when a sync loss occurs (link goes down).  

software reset

— A reset performed  in the

Command Facility Main Menu or in the
LCD/Keypad menu.  This may be a warm or
cold start.

SOH, start of header

— A control character used to

indicate the beginning of a message header. 

space

— A binary 0 in data communications. 

spacer

— A piece of the Multiserver hardware that

separates one module from another.

stacking connector

— A coupling containing

electrical pins or sockets that are located on the
top and bottom of a module board to connect
electrical wires from one module board to
another.  The connector on the underside is
referred to as a shroud, and the connector on
top is referred to as a block.

start bit

— The first bit in asynchronous

transmission.  It is used to indicate the
beginning of a character. 

stop bit

— The last bit in asynchronous

transmission, used to indicate the end of a
character. 

Содержание 5000 MX215C, 5000 MX218C













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды