manualshive.com logo in svg

Black Box 5000 MX215C, 5000 MX218C, Руководство пользователя

Поделиться
Скачать
Black Box 5000 MX215C, 5000 MX218C Скачать руководство пользователя страница 248

Multiserver 5000

246

• HP port should be enabled when Term Type 10 is

configured by the CPU or the terminal user.

• Do not define the DC2 character for either 

X-ON or X-OFF when using X-ON/X-OFF flow
control for Hewlett-Packard systems.

• For ENQ/ACK protocol to function properly,

one port must be set as 

host

and the other port

as 

terminal

.

• An HP port configured as Host cannot enter the

Command Mode.

S

POOL

M

ODE

(T

ERM

T

YPE

19)

The spool mode uses X-ON/X-OFF characters from
the printer to indicate status conditions to the
HP3000 system. To avoid a system timeout, disable
the HP Channel Feature for ports that use the spool
mode. Set buffer and flow control to 

none

(using the

Channel Characteristics Menu) when HP2631 and
HP2635 printers in an HP system are to operate in
the spool mode.

Ports with flow control = 

none

will not respond to X-

ON/X-OFF from the terminal or the computer. 

Table F-1

summarizes HP and non-HP channel

configurations.

Tail-Ending Mode (Dial-Up Modem Operation)

The tail-ending mode operates only for dial-up
modems connected to terminal ports. This mode
guarantees that a Multiserver unit, upon recogni-
tion of a disconnect request from a dial-up modem,
will deliver that disconnect indication to its
associated Multiserver port (the far-end terminal or
host), even if the composite line is temporarily out
of service.

For dial-in modems, set the configuration as follows:

• EIA Control

Enable

• Sync Loss Disconnect

Enable

A high transition of 

RI

on a port with enabled EIA

controls, flags the port as a dial-up modem link.

If DSR is dropped by the modem at a dial-up
modem terminal interface, the Multiserver unit will
drop all control signals to the modem (DTR, Busy,
RTS, and Unassigned). DSR is passed through the
link, either immediately or after composite
reacquisition. DSR is then held low for one second.
The outbound signals in the direction of the
modem (DTR, Busy, and RTS) are made
transparent.

At the host interface, the tail-ending mode operates
with the DTR control signal. When the host drops
DTR, the Multiserver unit will drop RI, DSR, CD,
and CTS to the host. DTR is passed to the modem
(immediately or after composite sync reacquisition)
and is held for one second, after which the
previously held controls to the host are allowed to
be passed transparently.

Inbound data, which has been buffered in the local
Multiserver unit, will be passed through to the
remote terminal or host before interface signal DSR
goes low. Outbound data, buffered for the port that
performed the disconnect, is discarded.

N

OTES

:  

• Performing a reset on a tail-ending port

terminates the Command Facility on that port.

• Tail-ending ports may not perform composite

loopback tests.

• The remote unit will not display the current

configuration for a dial-in port if the values for
this port have been changed using the Local
Channel Configuration Menu.

Table F-1. Spool Mode

User Terminal Configuration                                                    Multiserver 5000 Configuration

Flow

Buffer

Type of Terminal

Term Type

HP Channel 

Control

Control

HP26XX CRTs

10

Enabled

X-ON/X-OFF

X-ON/X-OFF

Non-HP 4 (TTY)

Disabled

X-ON/X-OFF

X-ON/X-OFF

n/a

HP2631 and HP2635 Printers

19

Disabled

None

None

Содержание 5000 MX215C, 5000 MX218C













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды