manualshive.com logo in svg

Black Box 5000 MX215C, 5000 MX218C, Руководство пользователя

Поделиться
Скачать
Black Box 5000 MX215C, 5000 MX218C Скачать руководство пользователя страница 109

CHAPTER 10: Switching Configuration

107

Table 10-1.  Switching Control (continued)

Option

Description

2.

Enable Channel

This option returns an out-of-service async or voice/fax channel (or range of channels) to
the idle state.  When this selection is chosen, the following prompts will appear on the
screen: 

ENTER NODE/CHANNEL# (OR RANGE OF CHANNELS)(^X TO ABORT):

Enter the node ID, slash, channel (port) number or range of channels.  Press 

<cr>

.

When the port is enabled, the screen will return to the Switching Control Menu.  To
abort, press 

^X

.

Channel ranges should be in the form:  starting channel, dash, ending channel.
Example:  To enable channels B6 through B12, enter

B6-B12 

and press 

<cr>

.

3.

Force Connect

Connects two idle or out-of-service ports or range of ports.  The ports must be both of
like kind (voice-to-voice, sync-to-sync, async-to-async).  If a port is force-connected, no
other channel may access it through switching calls.  When this menu option is chosen,
the following prompt appears:

ENTER FROM NODE/CHANNEL# (OR RANGE OF CHANNELS)(^X TO ABORT):

Enter the node ID, slash, and then a channel (port) number or a range of channels on
the local Multiserver.  Channel ranges should be in the form:  starting channel, dash,
ending channel.  Example:  For channels B6 through B12, enter 

B6-B12

.  Press 

<cr>.

The following prompt appears:

ENTER TO NODE/CHANNEL# (^X TO ABORT):

Enter the node ID, slash, and then a channel (port) number.  Press 

<cr>

.  To abort, press 

^X

.

When force-connecting a range of ports, connections will be made only between ports of
like type:  voice-to-voice, async-to-async, sync-to-sync.  If the “from” range is greater
than the “to” range, the unpaired “from” ports will not be connected.  See 

Section 10.3,

Force-Connecting a Range

, for more information.

Notes

: 

• When force-connecting an async channel, be sure that the Remote CTS

Control (option 2 of Extended Features Menu) is set for the device attached
to the port(s).

• If you force-connect a port already force-connected, the new connection

overrides the old one.

• When a channel is force-connected, all current connections, regardless of

method (class, matrix, force connect), are terminated.

• Parity conversion is not supported on force-connected channels.

• If a port is connected to either the Command Facility (via $CMD) or

NETMan, it will not be force-connected.

Содержание 5000 MX215C, 5000 MX218C













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды