manualshive.com logo in svg

Black Box 5000 MX215C, 5000 MX218C, Руководство пользователя

Поделиться
Скачать
Black Box 5000 MX215C, 5000 MX218C Скачать руководство пользователя страница 176

Multiserver 5000

174

Display

voice/fax signal.  The indicator
lights on the voice/fax module show
the level (see 

Figure 13.5

).  When

this test is initiated, the display will
read 

[Active]

.

Terminate

Terminates all the tests initiated at 

Test

this menu.

Once a test is initiated, an 

[Active]

message is

displayed on the LCD.  All tests remain active until
terminated with Terminate Test.  The next time you
cycle through the LCD Menus, an 

[Active]

message is displayed, meaning the test was
previously invoked and is still active.  When a test is
complete or is terminated, the LCD will display

[Inactive]

.

For additional information on these tests, consult
the 

MS1 Voice/Fax Card User’s Manual

.

\

I

NTEGRAL

D

EVICES

When this menu is selected, the screen will prompt
for the channel number to be tested.  If a
CSU/DSU module is installed in the Multiserver,
the following diagnostic options will be offerred:

Option

Description

Local

Verifies the integrity of data entered

Loopback

into the local ISU.

Digital

Verifies the data path of the system 

Loopback

from a terminal at the remote unit,
and verifies the data path from a
local terminal up to the ISU module.
This test requires operator
intervention at the remote unit.  The
Multiservers at both ends of the link
must be in the Remote Composite
Loopback Test to perform this test
(see above).

Test Pattern

Generates a test pattern within the 

(TP)

ISU to verify the ability of the ISU
and the DDS to transfer data in both
directions.  This requires operator
intervention at the remote unit.

Local 

Verifies the local ISU module by 

Loopback

using a test pattern generated 

with TP

within the ISU module.

Terminate

Terminates all the tests initiated at 

Test

this menu.

Once a test is initiated, an 

[Active]

message is

displayed on the LCD.  All tests remain active until
terminated with Terminate Test.  The next time you
cycle through the LCD Menus, an 

[Active]

message is displayed, meaning the test was
previously invoked and is still active.  When a test is
complete or is terminated, the LCD will display

[Inactive]

.

For additional information on these tests, consult
the 

MS1 56K CSU/DSU Module User’s Manual

.

13.7  Configuration

Currently the only option in this menu that can be
accessed is Hardware Overview.  This function is a
display only of the hardware configuration.  

Press the down arrow to read the PROM # and
right/left arrows to display the module information.
The display shows the following items in this order:

PROM #

Slot $:  NMS Module (if installed)

Slot A:  Module and Revision

Slot B:  Module and Revision

Slot C:  Module and Revision

Slot D:  Module and Revision

Slot E:  Module and Revision

Содержание 5000 MX215C, 5000 MX218C













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды