manualshive.com logo in svg

Black Box 5000 MX215C, 5000 MX218C, Руководство пользователя

Поделиться
Скачать
Black Box 5000 MX215C, 5000 MX218C Скачать руководство пользователя страница 144

Multiserver 5000

142

Special rules apply when entering the characters
listed in 

Table 11-4

in a dialog message.

Length:

Dialog Messages vary in
maximum length.

Syntax:

Alphanumeric characters (A to Z,
0 to 9), spaces, and all symbols
may be used. Messages are not
case-sensitive.

All dialog messages can be quickly reviewed
through the View Configuration menu.

Table 11-5. Dialog Messages

Max

Option

Default

Char

Description

1.

Channel Password

ENTER PASSWORD:

31

Asks the user for the password associated
with the sign-on port. It is the first dialog
message that appears on the user’s screen
when attempting connection to the network.

2.

Welcome

(No default message)

58

Appears when the user first successfully
connects to the Multiserver.

3.

Class Request

ENTER CLASS:

31

Asks the user for the destination class name
or channel.

4.

Class Password

ENTER CLASS PASSWORD:

31

Asks for the password of the requested class.
If no password is configured for the class, the
user should respond with a carriage return.

5.

Connected

CONNECTED

31

Displayed when a connection to any resource
has been established.

6.

Queue

WAITING Q=

n

17

Displays when a user is waiting for a
connection to a port. The user types a
character or 

<cr>

and the message displays

on the screen, indicating the user’s place in
the queue. The value 

n

following the queue

message is the user’s place in queue.

7.

Busy

BUSY

17

Displays to users using matrix switching
when the requested port is in use by another
network user.

8.

Disconnected

DISCONNECTED

17

Sent when the call has been disconnected. 
It is sent only to the call originator using
switching.

9.

No Answer 

NO ANSWER

17

Indicates there is no answer from the
destination port.

10. Unavailable

UNAVAILABLE

17

Sent when a user requests a resource that
exists, but is not in service (operational).

Содержание 5000 MX215C, 5000 MX218C













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды