manualshive.com logo in svg

Black Box 5000 MX215C, 5000 MX218C, Руководство пользователя

Поделиться
Скачать
Black Box 5000 MX215C, 5000 MX218C Скачать руководство пользователя страница 113

CHAPTER 10: Switching Configuration

111

voice-voice, async-async, sync-sync connections will
be made.

If the “from” range is greater than the “to” range,
the unpaired from ports will not be connected.

E

XAMPLE OF

F

ORCE

-C

ONNECTING A

R

ANGE

In the example in 

Figure 10-3

, a user will attempt to

force-connect 15 ports on the NEWYORK node to
ports on the DENVER node.  Because the “from”
range is greater than the “to” range, only 13 ports
will be paired (essentially truncating the last 2
ports).  Out of the 13 paired ports, 9 connections
will be made.

“from” range =

NEWYORK/A2-D2  
(15 ports)

“to” range

=

DENVER/2  (beginning at
port A2)

Notice the following:

• Ports NEWYORK/B1 and B2 are paired but not

connected to DENVER/B1 and B2 because they
are not the same channel type.

• Port numbers NEWYORK/B3-B6 made

successful connections to DENVER/C1-C4
because their channel types match, even though
the port numbers are different.

• Ports NEWYORK/D1 and D2 are not paired up

at all, because the “from” range is greater than
the “to” range.

NOTE:  If an async port within a specified range is

connected to the Command Facility (via
$CMD), it will not be force-connected.

10.4  Synchronous Connections

Sync ports must be connected via force-connect
(option 3 on the Switching Control Menu).  The
connection may be between the local Multiserver
and the remote Multiserver or it may be within the
local Multiserver.  Sync connections cannot be
made to a feeder mux.

Before proceeding, note the following:

• To change protocol, you must force-disconnect

the channel.

• When force-connecting, be sure that the

protocols match.  (Do not attempt to change
protocols on one side only.)  Be sure to reset the
unit after reconfiguration.

When the connection is complete, the Switching
Control Menu will reappear on the screen.
Continue this process until all sync connections
have been made.  

NEWYORK

A2

A3

A4

A5

A6

B1

B2

B3

B4

B5

B6

C1

C2

D1

D2

Port Number

Sync

Async

Async

Async

Async

Async

Async

Async

Async

Async

Async

Voice

Voice

Voice

Voice

Channel Type
(Port Configuration)

Channel Type

Sync

Async

Async

Async

Async

Voice

Voice

Async

Async

Async

Async

Async

Async

(Port Configuration)

A2

A3

A4

A5

A6

B1

B2

C1

C2

C3

C4

C5

C6

Port Number

DENVER

KEY:

Channels paired and connected
Channels paired but not connected because Channel Types were unlike
Channel pairing attempted, but no port available in the “to” range

Figure 10-2.  Example of Force Connecting a Range of Channels.

Содержание 5000 MX215C, 5000 MX218C













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды