Black Box 5000 MX215C, 5000 MX218C Скачать руководство пользователя страница 102

Страница: 102 / 268

Multiserver 5000

100

disconnect the channel in the event of loss of sync on the link.

Table 9-11. Asynchronous Channel Features (continued)

Option

Default

Description

Command Mode

^X Break

There are two keying sequences available to the channel user for

Entry Sequence

accessing the Command Mode. If the ^X^Y option is chosen, then both

^X^Y

and

^X <break>

can be used to access the Command Mode. If

^X Break is chosen, then only

^X <break>

will access the Command

Mode.

Command Mode

Enable

Enables/disables access to the Command Mode for the port being

Access

configured. If the Command Facility Main Menu Access is

enabled

, then

this feature must be

enabled

• To permit the user access to Async Channel Loopback tests and Local
Channel Configuration only,

enable

this option and

disable

Command

Facility Main Menu Access.
• To allow only Channel Loopback tests to the user,

enable

this option,

disable

Local Channel Configuration, and

disable

the Command Facility

Main Menu Access.

See

Section 11. 2, The Command Mode

, for more information on the

Command Mode.

10. Command Facility

Enable

Enables/disables access to the Command Facility Main Menu for the port

Main Menu Access

being configured. The Command Mode Access must be

enabled

in order

to enter the Command Facility via the Command Mode menu. If entering
via the $CMD matrix, switching must be

enabled

for the port (see

Section

10.7, Asynchronous-Channel Switching Parameters

). When

disabled

the user cannot view or change the system operating parameters. The
channel user can still access the Command Mode (if

enabled

) for local

channel configuration (if Local Channel Configuration is

enabled

) or for

performing channel loopback tests.

See

Section 11.3, Configuring the Command Facility

, for more

information on the Command Facility.

11. Local Channel

Enable

Enables/disables access to the Local Channel Configuration Menu

Configuration

for the port being configured. Both this feature and the Command Mode

Access must be

enabled

to access the Local Channel Configuration

menu. Once accessed, the user can make changes to that port’s
operating parameters. If this feature or Command Mode Access is

disabled

, access to the Local Channel Configuration menu will be

blocked.

Содержание 5000 MX215C, 5000 MX218C












































































































































































































































































Результаты поиска

Содержание 5000 MX215C, 5000 MX218C

Отзывы:

Бренды по названию

Популярные бренды

Black Box 5000 MX215C, 5000 MX218C, Руководство пользователя

Результаты поиска

Содержание 5000 MX215C, 5000 MX218C

Отзывы:

Бренды по названию

Популярные бренды