manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 93

893-741-B

A3-5

Configuring Ports

Port Mode

The Model  5390 port can be opened from a device attached to the port or from the network requesting 
attachment to a device. The port mode, specified by the mode parameter, dictates the direction from 
which the port can be opened. The port mode options are adaptive, arap, auto_adapt, auto_detect, 
cli, connect,  dedicated, ipx, ndp, ppp, rlogin, slave, slip, telnet, tn3270, and unused. The 
Model 5390 server ignores a port defined as unused.

A port defined as adaptive is used for bidirectional modems. An adaptive port becomes a cli port 
when an incoming call is received and a slave port when the port receives a request from the network 
to make an outgoing call (see Modems starting on page A6-1 for details on configuring ports for 
modems).

A port defined as arap can perform as a network interface using the AppleTalk Remote Access 
Protocol (ARAP).

A port defined as auto_detect automatically determines the protocol of an incoming packet and 
converts to ipx, ppp, arap, or cli mode accordingly. 

A port defined as auto_adapt automatically detects whether packets are incoming or outgoing. For 
incoming packets, the port behaves as if it were set to auto_detect mode, then determines the 
incoming protocol and converts to the appropriate mode. For outgoing packets, the port operates in 
slave mode.

Both cli and dedicated mean that the port is opened from the device. The difference between these 
two modes is that cli allows access to the Model 5390 Command Line Interface (which provides 
access to multiple hosts). A port defined as dedicated can access only one host via the connection 
request command (dedicated_port is set to rlogin or telnet). A terminal or an inbound modem 
typically attaches to a port defined as either cli or dedicated.

A port defined as connect communicates with a LAT host via the connect command. Use this option 
in conjunction with the asynchronous port parameter dedicated_arguments.

A port defined as ipx allows dial-in access via the Internet Packet Exchange protocol used by Novell 
Netware networks.

A port defined as ndp is a Novell-dedicated port; it allows dial-in and dial-out access for Novell 
networks, as well as routing between them.

A port defined as ppp using the asynchronous port mode parameter supports the Point-to-point 
Protocol. 

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды