manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 169

893-741-B

A8-1

Chapter A8

Point-to-Point Protocol (PPP)

This chapter describes the Model 5390 implementation of the standardized method for transmitting 
datagrams from multiple protocols over serial point-to-point links. PPP provides three functions:

•

Asynchronous High-level Data Link Control (HDLC) to encapsulate the packets.

•

Link Control Protocol (LCP) to establish the connection between peers.

•

A family of Network Control Protocols (NCPs) to configure network interfaces.

PPP allows a site to use the Model 5390 server as a wide area network (WAN) hub, tying distant 
corners of an IP network together over low cost phone lines. PPP features include:

•

FCS error checking.

•

Agreement by each end of the connection on a mutually acceptable set of features for that 
connection.

•

Large Maximum Receive Unit (MRU) size—negotiations start 
at 1500.

In setting up a PPP link:

•

You can attach a PC to the Model 5390 serial port. Using PPP as the network interface, the PC 
becomes a host on the network. For a remote PC with a PPP client that supports scripting, you 
can configure a port in CLI mode. Then, a user at a remote PC can dial into the Model 5390 
server using a modem and convert the port from a CLI to a PPP link using the CLI ppp 
command. After converting the port to a PPP link, the remote PC becomes a host directly 
attached to the network.

•

Alternatively, you can set the Model 5390 port to auto_detect or auto_adapt. When the 
Model 5390 server detects the PPP protocol on the line attached to the port, it automatically 
converts the port mode to PPP and starts LCP negotiations.

•

If your PPP client is expecting to connect to a server already in ppp mode, the Model 5390 
port’s mode must be ppp, auto_detect, or auto_adapt.

•

You can use PPP to connect two separate networks, routing data from one network to the other 
over the PPP link.

NOTE: 

The Model 5390 server cannot boot over a PPP link.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды