manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 649

893-741-B

C2-43

Configuration Parameters

These features are available separately or in any combination. Each Model 5390 server requires a 
unique key value for the feature(s) you choose; contact your supplier to obtain an option_key value.

output

_flow_control

This asynchronous port parameter defines the method that a device uses to stop output from the 
Model 5390 server. Table C2-11 describes the valid options; the default is start/stop.

output_is_activity

This asynchronous port parameter defines activity as output. When enabled, the Model 5390 server 
resets the inactivity timer when it sends output from the port. If the line type is hardwired, the 

Table C2-11. Valid Options for the output_flow_control 

Parameter 

Option

Description

bell

Comparable to setting the parameter to none.

eia

Selects hardware flow control; eia works only if the 
control_lines parameter is set to flow control or both and 
the device is wired properly.

start/stop

Specifies XON/XOFF flow control (independent of the 
control_lines parameter). Upon receiving XOFF 
(output_stop_char), the Model 5390 server stops sending 
output to the device. After receiving XON 
(output_start_char), the Model 5390 server starts sending 
output to the device. The Model 5390 server removes these 
characters from the data stream. 

both

Specifies both in-band (XON/XOFF) and out-of-band 
(CTS/RTS) flow control (if control_lines is set to 
flow_control or both). Both flow controls are independent; 
data flows out of the port only if CTS is high and the last 
received character was XON. Receiving XOFF or dropping 
CTS stops output (Model 5390 to device) flow.

none

Specifies no flow control; characters are lost if the buffers 
overflow. 

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды