manualshive.com logo in svg

Bay Networks 5390, Администрирование, Страница: 416 / 888

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 416

A14-60

893-741-B

Configuring Hosts and Servers

Figure A14-1. Model 5390 Server TCP/IP Gateway

LAT-to-Telnet Gateway

The LAT-to-Telnet gateway allows the Model 5390 server to translate an advertised LAT service to 
a telnet connection for a specific IP address. This allows a LAT user to move transparently between 
the LAT, TCP/IP, and Telnet protocols.

To set up the LAT-to-Telnet gateway, the system administrator must add a translation directive to 
the gateway section of the configuration file. This new entry has the following syntax:

annex ip_address 
       translate lat service_name [identification id_string] to telnet

ip_address [port_number]

end

For example, a translation entry for a UNIX system named frodo running TCP/IP with the IP address 
132.0.0.50 and a VMS host running LAT would look like this:

annex 132.0.0.35

translate lat frodo identification ’Login service for TCP/IP  
host ’frodo’ to telnet 132.0.0.50

end

After making the above translation entry in gateway, the system administrator must make sure that 
the Model 5390 server is running LAT and that the group_value parameter is configured so that 
the LAT host can use this service. Also, the Model 5390 server must be rebooted.

Using the above sample entry, after the Model 5390 server is rebooted, the LAT user will see an 
entry for frodo in the services display and the host field will correspond to the service_name set in 

TCP/IP

TCP/IP

LAT

LAT

TCP/IP

LAT

User Data

Model 5390 server

4555

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов