manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 521

893-741-B

B1-13

Network Administration

Table B1-7.

IP Fields in the netstat –r Command Display 

Field 

Explanation

Destination 

The IP address of the route’s destination, followed by a slash 
(/), followed by the number of 1 bits, counting from left to 
right, in the Destination’s subnet mask. For example, the /24 
following the IP address 132.254.1.0 indicates a subnet 
mask of 24 bits (eight octets), or 255.255.255.0. (For more 
information, see Defining Routes on page A12-50.) If IP 
Default appears in the Destination field, the entry specifies 
the route the Model 5390 server uses if it can find no other 
route for a destination. If a name appears in the Destination 
field, the entry is for a host route; name servers do not have 
names for network routes. (However, the Model 5390 server 
does not always know a host’s name.)

NextHop

The next router to which packets with the given Destination 
are sent. If the Destination is a local interface, this field 
displays an asterisk (*); interface routes have no next hop.

Flags

The following three flags:

First flag

(Status)

 U

Q

D

The route is valid (up) and in use.
The route is valid but the interface is quiescent, i.e., the 
interface is not up yet or was brought down by expiration of 
the timer set by the net_activity port parameter. 
The route is invalid (down) and has a metric of 16 (RIP 
infinity). It will stay in the routing table for two more 
minutes so that other routers can learn that it is invalid.

Second flag

(Source)

C

I

R

S

The route was learned via an ICMP redirect. This can occur 
only when IP routing is disabled (by setting the routed 
parameter to N).
The route is an interface route.
The route was learned via RIP.
The route is a static route, learned from a route defined in 
the gateway section of the Model 5390 configuration file or 
a route entered using the CLI superuser route command.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды