manualshive.com logo in svg

Bay Networks 5390, Администрирование, Страница: 466 / 888

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 466

A15-46

893-741-B

Using Model 5390 Security

The following is a sample acp_logfile from a dial-back session:

Successful Dialback:

132.245.88.110:61060011:#05:940721:110630:ipx:login:\
CNA_FIXED,dialback request
132.245.88.110:61060011:#05:940721:110710:ipx:dial:\
CNA_FIXED, tel:568

No Outbound ports available  / port mode set wrong
132.245.88.171:4a0c0008:#02:940720:150441:ipx:login:\
CNA_FIXED,dialback request
132.245.88.171:4a0c0008:#02:940720:150614:ipx:dial:\
CNA_FIXED, ports busy

DSR low on outbound (dialback) modem:
132.245.88.171:4a0c0009:#02:940720:150753:ipx:login:\
CNA_FIXED,dialback request
132.245.88.171:4a0c0009:#02:940720:151259:ipx:dial:\
CNA_FIXED, srpc timed out

error from modem reset string received:
132.245.88.110:61060002:#05:940721:085212:ipx:login:\
CNA_FIXED,dialback request
132.245.88.110:61060002:#05:940721:085219:ipx:dial:\
CNA_FIXED, failed

To change the name and/or format of the acp_logfile, see Modifying the Supplied Security 
Application on page A15-74.

Using PPP Security

The Model 5390 server supports two authentication protocols for PPP: 

•

Password Authentication Protocol (PAP).

•

Challenge-Handshake Protocol (CHAP). 

Both of these protocols are run over the PPP link after the LCP negotiations are complete (for more 
details on using a PPP link, see Point-to-Point Protocol (PPP) starting on page A8-1).

NOTE: 

The Model 5390 server logs security events for ndp-mode ports 

as described in the Administering the Annex DOS Dial-out Software 
documentation. 

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов