manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 305

893-741-B

A12-47

Internet Protocol (IP) Routing

•

The message includes the required authentication information. This means that the Address 
Family Identifier field of the first entry in the message must have a value of 0xFFFF, the 
Authentication Type field of the first entry must have a value of 2 (a value of 1 indicates no 
authentication), and the Authentication field must contain a 16-byte unencrypted password.

•

The password in the message matches the value of the rip_auth parameter.

The Model 5390 server accepts all RIP 2 messages it authenticates, but does not necessarily discard 
all unauthenticated messages it receives.
Table A12-9 shows how the Model 5390 server accepts or discards a RIP message depending on 
whether or not the Model 5390 server and/or the message are configured for authentication and 
whether or not the password in the message matches the rip_auth password. 

Although RIP 2 authentication cannot protect your system against a user who has the physical means 
or access to diagnostic tools to tap the network, it nevertheless prevents SLIP or PPP users from 
injecting routes into the system.

Enabling and Disabling Active RIP

For active RIP to operate:

•

At least two Model 5390 interfaces must be operational.

•

Each SLIP, PPP, and Ethernet interface over which routing is to occur must have an IP 
address.

Table A12-9. Model 5390 RIP Version 2 Authentication 

Message Includes 
Authentication

Message does not 
Include Authentication

Model 5390 server 
Configured for 
Authentication

Accepts message if 
passwords match; 
otherwise, discards 
message.

Discards message.

Model 5390 server not 
Configured for 
Authentication

Discards message.

Accepts message.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды