manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 365

893-741-B

A14-9

Configuring Hosts and Servers

addr1

The route’s destination address.

subnet_mask

The subnet mask for addr1

. 

If the route is not a default 

route, you must specify a subnet mask, either in this field 
or in the /bits field (see below)

.

/bits

The subnet mask for addr1. This number represents the 
combined number of 1 bits in the network and subnet 
mask, from left to right. If the route is not a default one, 
you must specify a subnet mask either in this field or in the 
subnet_mask field (above). You cannot specify /bits for 
default routes.

default

This is the default route for the Model 5390 server.

addr2

The IP address of the next gateway the Model 5390 server 
uses to get to the destination address.

metric

The cost of using this route; typically, this is the number of 
hops from the Model 5390 server to addr2.

Table A14-2. Supported Keywords for gateway 

Entries—Format 2 

Keyword 

Definition

net|host

The destination specified by addr1 is a network or a host.

addr1

The IP address of the destination; use either 0 or default to 
add a default route.

/bits

This field specifies a subnet mask for addr1. The value of bits 
represents the combined number of 1 bits in the network and 
subnet mask. Do not specify this field for default routes.

addr2

The IP address of the gateway that reaches the destination 
address.

hops

The number of hops needed to reach the destination.

Table A14-1. Supported Keywords for gateway Entries—Format 1 

Keyword 

Definition

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды