manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 740

C3-64

893-741-B

Using the CLI Commands

To undefine or turn off a parameter that requires a value, enter one of the following values along 
with the parameter:

•

undef (or u).

•

none (or n).

•

The two characters ^ and @ (indicating a null string) for parameters that require control 
characters.

•

Double quotes ("") for the parameters prompt, term, and user (this is the only way to turn off 
these parameters).

Table C3-28. Setting Parameters Using the stty Command 

Parameter

Description

attn string

Defines a control character sequence as an attention character 
or string. Entering this character or string returns you to the 
CLI prompt. Make sure the selected control character 
sequence is not one that is used with any host applications. If 
both break and lbreak are not defined, and you do not define 
an attention character or string, you must log off the host to 
return to the CLI prompt. The default for a serial connection is 
a null string (""); the default for a virtual CLI connection is 

CTRL-A

.

back string

Defines a control character sequence as a backward switch 
character or string. Entering this character or string reopens 
the next lower numbered session, already established at your 
port, from within the current session without returning to local 
mode. Make sure the selected control character sequence is 
not one that is used with any host applications. To clear an 
existing switch, enter a null string ("").

On virtual ports, the switch is limited to one character; on 
non-virtual ports, the switch string can range from 1–16 
characters.

baud value

Sets the serial line speed for input and output. Possible values 
are: 75, 110, 134.5, 150, 200, 300, 600, 1200, 1800, 2000, 
2400, 3600, 4800, 7200, 9600, 19200, 38400, or 57600. The 
default is 9600.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды