manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 727

893-741-B

C3-51

Using the CLI Commands

For more details on routing, see Internet Protocol (IP) Routing starting on page A12-1.

Table C3-22. Arguments for the Superuser route Command 

Argument

Description

–f

Flushes the temporary routes from the routing table and route 
cache. 

–F

Flushes the hardwired and interface routes from the routing 
table and route cache. An interface route is a route to a 
network directly connected to the Model 5390 server. 
Model 5390 RIP automatically enters these routes into the 
routing cache and table.

–fF

Flushes all routes from the routing table and cache.

add

Adds a route to the route cache. It also adds the route to the 
routing table if the gateway argument specifies an address that 
is directly reachable on an active interface.

–s

Specifies a hardwired route that RIP cannot replace. 

default

Specifies the default route. In general, using route to add or 
delete a default route can have unpredictable results. The only 
time you can safely use route to add a default route is when a 
default route is not defined in the configuration file and the 
Model 5390 server is not receiving RIP updates.

dest

Specifies the destination address of the route.

mask

Specifies the subnet mask to apply to the destination address.

gateway

Specifies the IP address of the gateway (router) that is to be 
the next hop for the route. This address must be on a network 
directly attached to the Model 5390 server.

metric

Specifies the number of hops to the destination. Values range 
from 1 through 15; the default is 1.

delete 

Deletes a route (temporary, hardwired, or interface) from the 
route cache and the routing table. 

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды