manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 647

893-741-B

C2-41

Configuration Parameters

When disabled, the DSR signal is not required to connect to a slave line, and DSR is not required 
to activate a CLI line (see Modem Signals on page A6-1 for details on using need_dsr in conjunction 
with modem control). DSR is always considered active on ports that do not have a DSR signal (ports 
with partial modem control lines). A Y enables this parameter, an N disables it. The default is N.

net_inactivity

This asynchronous port parameter defines the amount of time that network protocols (for example, 
SLIP, PPP, ARAP) running on the serial line can remain inactive before the port is reset. Valid 
options are 0 to 255; a zero value indicates off. The default is 0 (off).

Use this parameter in conjunction with net_inactivity_units. 

net_inactivity_units

This asynchronous port parameter defines the units of time used for the port’s inactivity timer. Valid 
options are minutes or seconds. The default is minutes.

Use this parameter in conjunction with net_inactivity.

To set an inactivity timer of two minutes, set:

net_inactivity_units=minutes
net_inactivity=2

To set an inactivity timer of 30 seconds, set:

net_inactivity_units=seconds
net_inactivity=30

NOTE: 

Because the accuracy of the inactivity timer is within five sec-

onds, if net_inactivity_units is set to seconds, Bay Networks recom-
mends using a value for net_inactivity that is a multiple of five.

NOTE: 

If you are using an ISDN line, it is important to set 

net_inactivity to a small value, such as 30, and net_inactivity_units to 
seconds; otherwise, you may incur high costs from your ISDN service 
provider.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды