manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 736

C3-60

893-741-B

Using the CLI Commands

Blue Alarm

When the Blue Alarm is true, the T1 engine is receiving 
AIS (all ones unframed) from the network. When the Blue 
alarm is false, the T1 engine is not receiving AIS. The 
Blue Alarm event saved in the history buffer is also 
displayed.

Red Alarm

When the Red Alarm is true, the T1 engine has detected 
loss of frame synchronization. During this condition, the 
T1 interface is sending a Yellow Alarm to the network. 
When the Red Alarm is false, The T1 engine is in frame 
synchronization and the sync indication is true. The Red 
Alarm event saved in the history buffer is also displayed.

Yellow Alarm

When the Yellow Alarm is true, the T1 engine is receiving 
a Yellow alarm from the network. When the Yellow alarm 
is false, the T1 engine is not receiving a Yellow alarm 
from the network. The Yellow Alarm event saved in the 
history buffer is also displayed.

Loopback

The loopback status has the following possible states:

None - There is no loopback in progress. The test LED on 
the front panel is not illuminated.

Local - The T1 network interface is in local loopback. the 
test LED on the front panel is illuminated.

Line - The T1 network interface is in line loopback. The 
test LED on the front panel is illuminated.

Payload - This means that the T1 network interface is in 
payload loopback. The test LED on the front panel is 
illuminated.

Online

When illuminated, the T1 engine is engaged with the 
network. Otherwise, the T1 Network Interface and 
Drop/Insert Interface are isolated from the T1 engine.

Up Time

Amount of time the T1 engine has been up, in hours, 
minutes, and seconds. The “hours” field is a 16-bit 
register that can count up to 2700 days (more than 7 
years).

Table C3-27. The stats -T Command Display (continued)

Field

Description

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды