manualshive.com logo in svg

Bay Networks 5390, Администрирование, Страница: 349 / 888

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 349

893-741-B

A13-11

Filtering

address_pair

{ip_addr1[/n] | * | -1}

{ip_addr2[/n] | * | -1}

(Enter both addresses
on the same line; 
separate them with a 
space)

Matches packets passing in either direction between two 
specified IP addresses. To match only the non-host portion 
of an address, enter /n after the address, where n is the 
number of bits in the non-host portion of the subnet mask 
for this address. For example, 132.245.33.0/24 denotes a 
mask of 255.255.255.0, which matches destination 
addresses on network 132.245.33.0. (If you list the filter, 
132.245.33.0/24 appears as the destination address.) To 
match all packets to or from a given address, enter one 
ip_addr and then specify * or -1 for the other. For example, 
*  132.254.33.2 and 132.254.33.2  -1 match all packets to or 
from 132.254.33.2. 

Restriction: if you use the address_pair keyword, you cannot 
use the keyword dst_address or src_address.

port_pair

{p1 p2| s1 s2 |*|-1}

Matches packets passing in either direction between the two 
specified TCP or UDP port numbers (p1 and p2) or standard 
service names (s1 and s2), such as finger, ftp, nfs, rlogin, 
smtp, telnet, or tftp. Use a space to separate the port 
numbers or names. To match all packets to or from a given 
port number, enter one port number or service name and 
specify –1 or * for the other. For a list of service names and 
their corresponding port numbers, see Table A13-5. 
Restriction: if you use the port_pair keyword, you cannot 
use the dst_port or src_port keyword.

protocol

{protonum|protoname}

Matches the transport protocol in the packet. Valid protocol 
numbers range from 1 to 65535. Or, specify a protocol 
name, such as tcp, udp, or icmp. If no protocol is given but 
a port is specified (dst_port, src_port, or port_pair), the port 
specification applies to both TCP and UDP packets.

Warning: A command such as the following can cause 
infinite loops:

filter add asy1 output include\
> protocol icmp icmp

Table A13-4. Keywords for add criteria Argument (continued)

Keyword

Value

Explanation

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов