manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 281

893-741-B

A12-23

Internet Protocol (IP) Routing

•

By issuing the CLI superuser route command. This lets you define a static route during the 
Model 5390 session, thereby avoiding the need to change the configuration file and reboot. 
However, the route only remains defined for the duration of the session. If the Model 5390 
server is rebooted, the route disappears.

Entering Routes in the Model 5390 Configuration File

The sections that follow describe how to enter routes in annex...end and subnet...end blocks in the 
gateway section of the Model 5390 configuration file. Usually, the configuration file path name is 
/usr/spool/erpcd/bfs/config.annex on the load host; you can modify this file using an editor such 
as vi.

You can define routes anywhere in the gateway section of the configuration file, but routes not in 
an annex...end or subnet...end block are discarded and not cached if they apply to interfaces that 
are immediately operational at boot time. Typically, the Ethernet interface is operational 
immediately, but SLIP and PPP interfaces may be slower to come up.

You may also want to set a default route and/or static routes in the configuration file of one or more 
hosts on your network. On a Berkeley-style UNIX host, define these routes in the /etc/gateways file.

Purpose of a Default Route

The Model 5390 server uses its default route when it cannot find a route in the routing table for a 
particular destination. Initially, no default route is defined. If the Model 5390 server receives a default 
route in a RIP update, it learns and uses it. Or, you can configure a default route using the method 
described in this section. Once configured, this route is not replaced by any learned routes.

Default Route Entry Format 

To define a default route for the Model 5390 server, create an entry in the following format in the 
gateway section of the Model 5390 configuration file:

%gateway

annex 

IP_addr

route add 

[–h] 

default

 gateway_address [metric]

end

IP_addr is the address of the Model 5390 server that will use the default route; gateway_address is 
the IP address the Model 5390 server will use as the default gateway; and metric is the cost of using 
this default gateway.

Sample Configuration for Default Routes

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды