manualshive.com logo in svg

Bay Networks 5390, Администрирование, Страница: 211 / 888

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 211

893-741-B

A9-25

Internetwork Packet Exchange (IPX) Protocol

8

After setting the port parameters, reset the ports: 

admin: reset port 4,11

Accessing IP Nodes via FastLink II

This section applies to FastLink II versions earlier than 2.x.

After establishing an IPX connection between your remote PC and the Model 5390 ipx or 
auto_detect/auto_adapt port, you can also load an ODI-compliant TCP/IP stack. This allows you, 
for example, to read UNIX mail and access Netware services within one session on your remote PC.

PC Client Requirements

FastLink II’s implementation of ODI allows you to run IP and IPX on the same connection if:

•

The Model 5390 ODI driver is installed on the PC client.

•

The PC is running a third-party TCP/IP stack that uses ODI and provides the applications you 
want, such as ping, telnet, and rlogin.

•

You have configured an IP address for the PC client.

For more information on using third-party TCP/IP packages with FastLink II, refer to the FastLink 
II Client Pack document and the README.TXT file on the FastLink II Distribution Disk.

NOTE: 

Because an auto_detect or auto_adapt can also detect PPP, 

AppleTalk, and CLI connections, you must configure the port for these 
types of access as well as IPX. This includes configuring native security 
for each protocol (for example, PAP or CHAP for PPP) and for the CLI. 
To configure an auto_detect or auto_adapt port for IPX over
PPP (IPXCP), see Configuring Standards-based IPX (IPXCP) on page 
A9-7. For security reasons, auto_detect and auto_adapt ports do not 
accept SLIP packets. If a SLIP packet arrives on the port, the Model 
5390 server discards the packet.

NOTE: 

FastLink II allows you to make an IP connection to the Model 

5390 port only after you have already connected via IPX to that port.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов