manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 413

893-741-B

A14-57

Configuring Hosts and Servers

to the service. The Model 5390 server maintains information only for the services to which its users 
have access; the services command displays only the services to which Model 5390 users have 
access. 

Restricting Access to LAT Services

The group_value parameter specifies which remote group codes can access the local services 
offered by a particular Model 5390 server. To change the status of the Model 5390 group codes, 
the administrator must change the group_value parameter. 

The group_value parameter displays the group codes that are enabled; initially, the value is none. 
Allowable values are 0 through 255. The administrator must determine which LAT services to enable, 
and set the group codes accordingly. The syntax is:

set annex group_value group_range enable | disable

The group_range must be integers (0–255) separated by either a comma, to indicate multiple group 
codes, or a hyphen, to indicate a range of group codes; blanks are not permitted as delimiters. For 
example, set annex group_value 0–10, 15, 20, 240 enable enables group codes 0 through 10, and 
group codes 15, 20, and 240. For convenience, specifying all indicates all group codes. Thus, set 
annex group_value all enable enables group codes 0 through 255. The administrator can disable 
group codes in the same way using disable instead of enable.

After LAT is enabled, the appropriate group codes are enabled, and the LAT parameters have been 
reset (using the reset annex lat command), the services command may show no services available 
for approximately 0–60 seconds. This occurs because LAT hosts broadcast the LAT services they 
offer periodically, and the Model 5390 server does not update its services table until receiving this 
broadcast.

Accessing LAT from a Virtual CLI

The vcli_groups parameter specifies which remote group codes are accessible to virtual CLI users. 
All virtual CLI users have the same group code. The syntax is:

set annex vcli_groups group_range enable | disable

Accessing LAT from a Model 5390 Server Port

The authorized_groups parameter specifies which remote group codes are accessible to users on 
a particular Model 5390 port. Each port has its own authorized_groups setting. The syntax is:

set port authorized_groups group_range enable | disable

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды