manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 203

893-741-B

A9-17

Internetwork Packet Exchange (IPX) Protocol

Overview of auto_detect and auto_adapt modes

A port set to auto_detect or auto_adapt mode allows IPX or CLI dial-in access. 

Use auto_detect or auto_adapt mode with proprietary IPX if:

•

Your network environment supports mixed protocols and you are not concerned about which 
users will be dialing into which ports.

•

You want to administer and secure the port using na or admin.

•

You do not need proprietary IPX dial-out or routing functions. 

A port set to auto_detect mode automatically determines the protocol of an incoming packet and 
converts to ipx or CLI (or ppp or arap) accordingly. A port set to auto_adapt

 

mode automatically 

detects whether packets are incoming or outgoing. For incoming packets, the port behaves as if it 
were set to auto_detect mode, then determines the incoming protocol and converts to the appropriate 
mode. For outgoing packets, the port operates in slave mode (see Slave Ports on page A3-13), which 
has no meaning in a Novell context.

An auto_detect port defaults to cli mode if the Model 5390 server does not detect a particular 
protocol within 30 seconds. Pressing the Return key immediately upon connecting to an 
auto_detect port also puts the port in cli mode. From cli mode, the user can then set the port to ipx 
mode by issuing the ipx command. 

In Figure A9-4, if the modes for ports 4 and 11 are auto_detect or auto_adapt, and an IPX packet 
arrives on either port, the result is the same as if the port mode is set to ipx. If PPP, AppleTalk, or 
CLI connection is made to the port, the port behaves as if its mode were set to that protocol. To 
configure auto_detect/auto_adapt ports, see Configuring auto_detect and auto_adapt mode Ports 
and Modems on page A9-24.

NOTE: 

An auto_detect or auto_adapt port also allows PPP and ARAP 

access. Although these protocols are not meaningful for proprietary 
IPX, the fact that they can access the Model 5390 server through this 
kind of port compromises Model 5390 security. For a completely secure 
auto_detect or auto_adapt port, configure native security for each pro-
tocol that can access it (for example, configure PAP or CHAP for PPP).

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды