manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 731

893-741-B

C3-55

Using the CLI Commands

If you issue the slip command, and the port is not configured properly for SLIP, the terminal displays 
This port cannot be used for SLIP (for more details on using a SLIP link, see Serial Line Internet 
Protocol (SLIP) starting on page A7-1).

stats

The stats command displays Model 5390 statistics. Table C3-25 describes the arguments for stats. 
The syntax is:

stats [–sm [ports][time] |[–op]

NOTE: 

The remote host must be configured to use these addresses. 

Resetting the port returns it to CLI mode. You cannot use the minimum 
uniqueness feature with the slip command.

Table C3-25. Arguments for the stats Command 

Argument

Description

–s

Displays statistics for all serial ports. You can enter a single 
port (–s5) or a range of ports (–s5–10 or –s5,7,9–12). This 
argument also displays control line status in which an asserted 
signal appears in upper case letters and a de-asserted signal 
appears in lower case letters.

–s time

Displays serial line statistics, pausing between each display 
the number of seconds specified by time. Entering the attention 
character, attention string, or the Break key aborts the display.

–m

Displays statistics for active control lines much the same as –s, 
but displays the modem controls for inactive control lines (that 
is, unattached slave lines) rather than displaying idle. 

–m time

Displays statistics for both active and inactive control lines, 
pausing between each display the number of seconds specified 
by time.

–o

Displays the status of the Model 5390 server-keyed options 
and disabled modules.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды