manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 663

893-741-B

C2-57

Configuration Parameters

service_limit

This Model 5390 parameter defines the maximum number of LAT services that the Model 5390 
server can maintain in its local service table. When the table is full, the Model 5390 server removes 
the service that has been idle longest. If all services are busy and the table is full, the Model 5390 
server discards a new service. Allowable values range from 16 to 2048. The default is 256.

session_limit

This Model 5390 parameter specifies the maximum number of active sessions the Model 5390 server 
allows at one time. Allowable values range from 1 to 1152 or none (entering none sets the value to 
1152). The default is 1152.

short

_break

This asynchronous port parameter allows the Model 5390 server to return a user to the CLI prompt 
after receiving a break of less than two seconds. This occurs only at the CLI level. A Y enables this 
parameter, an N disables it. The default is Y.

sigproto

This T1 parameter is used to specify the inbound and outbound signaling protocols supported by 
each T1 channel (DS0). Each channel supports an inbound protocol and an outbound protocol. Both 
protocols must be specified even if they are the same. If the protocol pair is invalid, it is rejected 
with an error message. For inbound-only channels, the outbound protocol must be set to none. For 
outbound-only channels the inbound protocol must be set to none. The signaling protocols are listed 
in Table C2-18.

Table C2-18. Signaling Protocols 

Protocol

Possible Settings

loop_start

Bidirectional (default)

ground_start

Bidirectional

wink_start

Inbound, outbound, or bidirectional

immediate_start

Inbound, outbound

none

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды