manualshive.com logo in svg

Bay Networks 5390, Администрирование

Поделиться
Скачать
Bay Networks 5390 Скачать руководство пользователя страница 308

A12-50

893-741-B

Internet Protocol (IP) Routing

5

Reconnect to the Model 5390 server and enter the CLI stats -o command to make sure 

RIP is keyed On.

To disable active RIP, set the interface parameter rip_advertise to none for all Model 5390 
interfaces (see 

rip_advertise

 on page A12-57).

To disable both active and passive RIP, set routed to N and reboot the Model 5390 server. You 
do not need to reset option_key; setting routed to N disables whatever type of RIP is currently 
running.

Configuring Active RIP 

The following section assumes you have read the earlier sections on passive RIP. Where appropriate, 
this section refers back to the passive RIP sections to avoid repeating material described there. 
Remember that once active RIP is enabled, both passive and active RIP are running on all operational 
interfaces.

Defining Routes

After you have enabled active RIP, you do not need to define the 
default and static routes described for the configurations shown in
Figure A12-4 and Figure A12-5. The Model 5390 servers will learn about the routes to each other 
and to other networks through RIP updates they exchange, provided that, for subnetted networks, 
the rip_sub_advertise parameter is set to Y, which is the default (see Advertising Subnet Routes on 
page A12-51) and that you have configured subnet masks correctly.

Although the routes required for passive RIP need not be defined after you enable active RIP, you 
may want to define a default route and one or more static routes for other purposes. For example, 
a default router can act as a chokepoint through which all traffic to and from a network must pass. 
And, you can use static routes to reach routers that are not running active RIP.

Содержание 5390

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды